In the heart of winter, when the cold seeps through your home, the warmth of a furnace can provide much-needed respite. However, if the pilot light, the small flame that ignites the main burner, goes out, you will be left shivering in the cold. Fortunately, relighting a furnace pilot light is a relatively simple task that can be accomplished by following a few simple steps. With a few basic tools and a little patience, you can restore the warmth to your home in no time.
Before you begin, gather a few essential tools. You will need a flashlight to see into the furnace, a long-handled lighter or match to ignite the pilot light, and a screwdriver to adjust the gas valve. Additionally, it is a good idea to have a pair of pliers on hand to help you manipulate the gas valve if necessary. With your tools gathered, you are ready to begin the process of lighting the pilot light.
Locate the furnace’s access panel and remove it to expose the interior components. The pilot light assembly is typically located near the bottom of the furnace and consists of a small metal tube with a flame burning inside. If the pilot light is out, you will need to relight it. To do this, turn the gas valve to the “off” position and wait a few minutes for any residual gas to dissipate. Then, use the long-handled lighter or match to ignite the pilot light. Hold the flame near the base of the pilot light assembly and turn the gas valve to the “on” position. If the pilot light does not ignite immediately, repeat the process until it does.
How To Light A Furnace Pilot
If your furnace pilot light has gone out, you can relight it yourself in a few simple steps. First, locate the pilot light assembly. It is usually a small metal tube with a flame burning at the end. Once you have found the pilot light assembly, turn off the gas supply to the furnace. This is usually done by turning a valve located near the bottom of the furnace. Next, wait a few minutes for the gas to dissipate. Then, use a long match or lighter to light the pilot light. Hold the flame to the end of the pilot light tube until the flame ignites. Once the pilot light is lit, turn the gas supply back on. The main burner should now ignite and the furnace should start heating your home.
People Also Ask
How do I know if my furnace pilot light is out?
If your furnace is not producing heat, the pilot light may be out. You can check this by looking at the pilot light assembly. If there is no flame burning at the end of the tube, the pilot light is out.
What should I do if my furnace pilot light keeps going out?
If your furnace pilot light keeps going out, there may be a problem with the thermocouple. The thermocouple is a safety device that shuts off the gas supply to the furnace if the pilot light goes out. If the thermocouple is faulty, it may need to be replaced.
How much does it cost to light a furnace pilot light?
The cost of lighting a furnace pilot light is typically around $50. This includes the cost of labor and materials.
