The old, beat-up sun visor hanging down from your car’s ceiling is not only unsightly, it’s also a safety hazard. The visor can block your view of the sun when you’re driving, or contribute to an accident in the event of an airbag deploying. Fortunately, changing it is a simple task that most people can complete in under 30 minutes.
The first step is to gather your tools and materials. You will need a new sun visor, a screwdriver, and a pair of pliers. If your car has a sunroof, you may also need a TORX screwdriver. Once you have your tools and materials, you can begin the process of removing the old sun visor. Start by removing the screws that hold the visor in place. There are typically two screws located on either side of the visor. Once the screws are removed, you can carefully pull the sun visor down and away from the headliner. If the visor is stuck, you may need to gently pry it loose with the screwdriver.
With the old sun visor removed, you can now install the new one. First, align the new sun visor with the holes in the headliner. Then, insert the screws and tighten them into place. Be sure not to overtighten the screws, or you could damage the headliner. Once the screws are tightened, you can reinstall the trim pieces and your new sun visor is installed.
Gathering Necessary Tools
To successfully replace a sun visor, you’ll need a few essential tools. The table below lists the necessary items and their descriptions:
| Tool | Description |
|---|---|
| Screwdriver (Phillips or Flathead) | Used to remove and install screws that secure the visor. Choose the appropriate type of screwdriver for the screws in your vehicle. |
| Trim Tool or Plastic Pry Tool | A tool used to safely pry off the visor cover or trim pieces without damaging them. This is especially useful for removing visors that are held in place by clips or snaps. |
| Replacement Sun Visor | The new sun visor that will replace the old, damaged, or missing one. Ensure that the replacement visor is compatible with your vehicle’s make and model. |
Additionally, you may want to consider having the following items on hand for convenience:
– Gloves to protect your hands from any sharp edges or dirt
– A towel or cloth to clean the area where the visor is being installed
– A flashlight or headlamp to provide better visibility if working in low-light conditions
Tightening and Securing the Screws
Once the new visor is in place, it’s time to tighten and secure the screws. Follow these steps to ensure a secure fit:
- Locate the screws that hold the visor in place. They are typically located on the sides or top of the visor.
- Use a screwdriver or drill to tighten the screws. Be sure to tighten them securely, but do not overtighten as this could damage the visor or the screws.
- Check the visor to make sure it is secure. If it still feels loose, tighten the screws further.
- Test the visor by moving it up and down. It should move smoothly and stay in place.
- If the visor is still not secure, you may need to use a different type of screw or a washer to create a better fit.
- Once the visor is secure, clean up any excess screws or debris.
- Enjoy your new visor!
| Tools Required | Description |
|---|---|
| Philips screwdriver or drill | For tightening the screws |
| Washers (optional) | To create a better fit if the visor is loose |
| Clean cloth | For cleaning up excess screws or debris |
How To Change Sun Visor
Changing a sun visor is a simple process that can be completed in a matter of minutes. Here are the steps on how to do it:
- Locate the clips or screws that hold the sun visor in place. On most vehicles, the sun visor will be held in place by two clips or screws, one on each side.
- Carefully remove the clips or screws. Use a screwdriver or a trim removal tool to carefully remove the clips or screws that hold the sun visor in place. Avoid using excessive force, as you do not want to damage the sun visor or the headliner.
- Pull the sun visor down and out of its mounting brackets. Once the clips or screws have been removed, you should be able to pull the sun visor down and out of its mounting brackets.
- Remove the old sun visor from the mounting brackets. Once the sun visor has been pulled down, you can remove it from the mounting brackets.
- Install the new sun visor. To install the new sun visor, simply slide it into the mounting brackets, and then push up on the visor until it snaps into place.
- Replace the clips or screws. Once the new sun visor is in place, replace the clips or screws that hold it in place. Tighten the clips or screws until they are snug, but do not overtighten them.
People Also Ask about How To Change Sun Visor
How much does it cost to replace a sun visor?
The cost to replace a sun visor will vary depending on the make and model of your vehicle, as well as the type of sun visor you choose. However, you can expect to pay anywhere from $20 to $100 for a new sun visor.
Can I replace a sun visor myself?
Yes, you can replace a sun visor yourself. The process is relatively simple and can be completed in a matter of minutes. However, if you are not comfortable working on your vehicle, you may want to have a mechanic replace the sun visor for you.
How often should I replace my sun visor?
Sun visors do not typically need to be replaced very often. However, if your sun visor is damaged or broken, you should replace it as soon as possible. A damaged or broken sun visor can be a safety hazard, as it can block your view of the road.
