In the realm of military grooming, the military bun has emerged as a practical and stylish staple. Whether you’re a seasoned veteran or a recruit fresh out of basic training, mastering the art of crafting a flawless military bun is an essential skill. Its sleek, no-nonsense design not only exudes professionalism but also ensures that your hair remains secure and out of the way during demanding physical activities.
To begin, gather your essential tools: a brush, hair elastic, and bobby pins. Start by brushing your hair thoroughly to remove any tangles or knots. Create a high ponytail at the crown of your head, securing it tightly with the elastic. Take the length of your ponytail and wrap it around the base of the ponytail holder, cinching it in place with bobby pins. This forms the foundation of your bun.
Once the base is established, divide the remaining hair into two or three sections. Roll each section into a tight coil and tuck them under the bun, securing them with more bobby pins. Adjust the coils to create a uniform and balanced bun. Finally, smooth down any flyaways or loose strands with a brush and apply a light mist of hairspray for added hold. Your military bun is now ready to face any challenge that comes your way.
Gather Necessary Materials
Creating a perfect military bun requires a few essential tools and materials:
Comb or Brush
A wide-toothed comb or a brush with soft bristles is necessary to detangle and smooth out your hair.
Hair Ties (2)
You will need two hair ties: one for securing the base of the bun and the other for holding it in place at the top.
Bobby Pins (Optional)
Although not mandatory, bobby pins can help keep the bun stable and prevent flyaways.
Hairspray (Optional)
Hairspray can provide extra hold and smooth down any unwanted frizz.
Prepare Your Hair
1. Gather Your Tools
Before you begin, ensure you have all the necessary tools at hand. These include a hairbrush, hair ties, bobby pins, a rattail comb, and hairspray (optional).
2. Brush and Section Your Hair
* Thoroughly brush your hair to remove any tangles or knots.
* Part your hair into two halves, creating an even center part.
* Secure the top half of your hair with a hair tie or clip. This will keep it out of the way while you work on the bottom half.
3. Tie Your Hair into a Low Bun
* Gather the bottom half of your hair and tie it into a low ponytail at the nape of your neck.
* Divide the ponytail into two sections and tie each section into a separate knot.
4. Cross and Secure the Knots
* Cross the left knot over the right knot.
* Secure the left knot around the base of the right knot using bobby pins.
* Repeat the process with the right knot over the left knot.
5. Tuck in the Loose Ends
* Use a rattail comb to tuck in any loose hairs around the base of the bun.
* Secure the loose hairs with bobby pins.
6. Shape the Bun
* Lightly brush the surface of the bun to achieve a smooth and even shape.
7. Use Hairspray (Optional)
* If desired, apply a light mist of hairspray to help keep the bun in place.
8. Secure the Top Section
* Release the top half of your hair and gather it into a ponytail.
* Position the ponytail directly above the bun and tie it off.
9. Wrap the Ponytail
* Wrap the ponytail around the base of the bun, securing it with bobby pins.
10. Finish the Look
* Smooth down any flyaways or stray hairs with a brush or hairspray.
* Spray a light mist of hairspray to set the style in place.
Secure Hair Into a Ponytail
1. **Brush your hair thoroughly.** This will help to remove any tangles or knots that could make it difficult to put your hair up into a ponytail.
2. **Gather your hair at the back of your head.** Use a hairbrush or comb to gather your hair into a ponytail at the desired height on the back of your head.
3. **Secure the ponytail with a hair elastic.** Wrap the hair elastic around the base of the ponytail twice, pulling it tight each time. Tuck the ends of the hair elastic under the ponytail to secure it.
You can also use bobby pins to secure the ponytail if you want it to be extra secure.
| Type of Hair | Recommended Elastic |
|---|---|
| Fine hair | Clear or nude elastic |
| Thick hair | Black or brown elastic |
| Curly hair | Spiral elastic |
4. **Smooth the ponytail.** Use a hairbrush or comb to smooth the ponytail and remove any flyaways. You can also use a small amount of hairspray to help keep the ponytail in place.
Twist and Coil the Ponytail
Next, you will create a series of coils using the ponytail, starting at its base. To do this:
-
Hold the ponytail in one hand and use your other hand to twist the hair at the base of the ponytail.
-
Continue twisting the hair until it is tightly coiled.
-
Once you have created a coil, use your fingers to push it up against the scalp.
-
Repeat steps 1-3 until all of the hair in the ponytail has been coiled. You can create as many or as few coils as you like, depending on the desired look.
| Number of Coils | Desired Look |
|---|---|
| 1-2 | Loose, casual bun |
| 3-4 | Medium-sized, more formal bun |
| 5+ | Tight, sleek bun |
Tighten the Bun
Once your hair is gathered into a ponytail, it’s time to tighten the bun. To do this, you’ll need to use a hair elastic or bobby pins. If you’re using a hair elastic, simply wrap it around the base of the ponytail twice and secure it. If you’re using bobby pins, insert them into the base of the ponytail, criss-crossing them to secure it. Once the ponytail is secure, you can start to shape the bun.
To shape the bun, start by dividing the ponytail into two equal sections. Then, take one section and wrap it around the base of the ponytail, tucking the end under the bun. Repeat this process with the other section, tucking the end under the bun as well. Once both sections have been wrapped around the base of the ponytail, tuck the loose ends of the hair under the bun to secure it.
If you want a tighter bun, you can use a hair net or bun cover to secure it. To do this, simply place the hair net or bun cover over the bun and secure it with bobby pins. This will help to keep the bun in place and prevent it from coming undone.
Here is a table that summarizes the steps for tightening a bun:
| Step | Instructions |
|---|---|
| 1 | Gather your hair into a ponytail. |
| 2 | Secure the ponytail with a hair elastic or bobby pins. |
| 3 | Divide the ponytail into two equal sections. |
| 4 | Wrap one section around the base of the ponytail and tuck the end under the bun. |
| 5 | Repeat this process with the other section. |
| 6 | Tuck the loose ends of the hair under the bun to secure it. |
| 7 | Use a hair net or bun cover to secure the bun (optional). |
Finishing Touches
7. Secure Loose Ends
Once the bun is complete, check for any loose hairs or flyaways. Use a bobby pin or hairspray to secure them and keep the bun in place.
To use a bobby pin, insert it into the hair at an angle, pushing it under the bun and out through the other side. Crisscross the other bobby pin over the first to create a secure hold.
To use hairspray, spray it lightly over the bun, holding the can about 6 inches away. Avoid overspraying, as this can make the hair sticky and crunchy.
Table: Hairspray Holding Strength
| Hold Strength | Usage |
|---|---|
| Light Hold | For loose hairs and flyaways |
| Medium Hold | For buns that need a little more support |
| Strong Hold | For buns that need to stay in place all day |
Materials Required
To get started, you’ll need a few basic materials: a hairbrush, hair elastics, bobby pins, and a mirror (optional).
Step-by-Step Instructions
- Brush your hair: Begin by brushing your hair thoroughly to remove any tangles or knots.
- Tie your hair into a high ponytail: Position your hair at the crown of your head and secure it tightly with an elastic band.
- Roll the ponytail: Take the ponytail and begin rolling it inward, towards your scalp. Keep rolling until you reach the base of your neck.
- Secure the roll: Once you’ve rolled the ponytail, use bobby pins to secure it in place. Pin the roll from the top and bottom to ensure it stays put.
- Tuck the remaining hair: If you have any flyaways or loose strands, tuck them under the bun and secure them with bobby pins.
- Smooth the bun: Use a hairbrush or comb to smooth the surface of the bun and create a polished look.
- Set the bun with hairspray: To keep your bun in place all day, spray it lightly with hairspray.
- Add accessories (optional): If you wish, you can add hair accessories to your bun for a touch of style, such as a hairband or bun cage.
Tips and Tricks
Choose the Right Hair Elastics
Use hair elastics that are strong enough to hold your hair securely without causing breakage. Clear or nude-colored elastics are preferred for a discreet look.
Use a Styling Gel or Mousse
Applying a small amount of styling gel or mousse to your hair before brushing can help control flyaways and create a smoother bun.
Secure the Bun Tightly
Make sure the bobby pins are inserted securely into the bun to prevent it from loosening throughout the day.
Roll the Ponytail Evenly
To achieve a neat and symmetrical bun, roll the ponytail evenly inward, keeping the width of the roll consistent.
Tuck Flyaways Underneath
For a polished finish, tuck any loose strands underneath the bun and secure them with bobby pins. Avoid leaving any hair sticking out.
Use a Hair Net
If you have short or fine hair, consider using a hair net before securing the bun with bobby pins. This will provide extra support and prevent hair from slipping out.
Smooth the Bun with a Hairbrush
After inserting the bobby pins, use a hairbrush or comb to gently smooth the surface of the bun, creating a clean and professional appearance.
Separate Thick Hair Into Sections
If you have thick hair, consider dividing it into sections before rolling the ponytail. This will make it easier to manage and create a more secure bun.
Perfecting the Military Bun
Creating a flawless military bun starts with proper preparation. Ensure your hair is freshly washed and dried, free of any tangles or knots. You’ll also need the following tools: a hairbrush, a hair elastic, and bobby pins.
Once you have gathered your tools, follow these steps meticulously for optimal results:
1. Brush Your Hair
Using a hairbrush, gently brush your hair to remove any tangles. Start from the ends and work your way up to the roots, smoothing out any knots.
2. Create a Ponytail
Position your hair at the crown of your head and tie it into a secure, tight ponytail. The elastic should not be too tight, as this can cause discomfort or damage to your hair.
3. Divide the Ponytail
Divide the ponytail into two equal sections and tie the ends together with a hair elastic. This will create the base of the bun.
4. Wrap the Bun
Take one section of the ponytail and wrap it around the base of the bun, tucking the end under the elastic. Repeat with the other section, creating a neat and smooth bun.
5. Use Bobby Pins
Secure the bun by inserting bobby pins at various points around the circumference. Pin in an X-shape for extra hold.
6. Smooth Out the Hair
Using a hairbrush or comb, gently smooth out any stray hairs around the bun to create a polished look.
7. Secure Loose Ends
If there are any remaining loose ends, tuck them into the bun or secure them with additional bobby pins.
8. Check the Symmetry
Step back and check the symmetry of the bun. The bun should be centered and evenly shaped.
9. Use Hairspray (Optional)
For extra hold, consider using hairspray to keep the bun in place and prevent flyaways.
10. Troubleshooting Tips
If you encounter any difficulties, here are some troubleshooting tips to help you achieve a flawless military bun:
| Issue | Solution |
|---|---|
| Bun is too loose | Tighten the hair elastic and use more bobby pins for security. |
| Bun is uneven | Divide the ponytail more evenly and wrap the hair more tightly around the base. |
| Stray hairs escape | Use hairspray or bobby pins to secure loose ends and smooth out the surface. |
How To Do A Military Bun
A military bun is a type of hairstyle that is commonly worn by military personnel. It is a neat and tidy style that is easy to maintain. To do a military bun, you will need a brush or comb, some bobby pins, and a hair tie.
- Brush your hair to remove any tangles.
- Pull your hair into a ponytail at the back of your head.
- Roll the ponytail up into a bun.
- Secure the bun with bobby pins.
- Smooth down any flyaways with a brush or comb.
Here are some tips for doing a military bun:
- Use a brush or comb to get rid of tangles in your hair. This will help to create a smooth and even bun.
- Pull your hair into a tight ponytail at the back of your head. This will help to keep the bun in place.
- Roll the ponytail up into a bun. Be sure to roll it tightly so that the bun is secure.
- Secure the bun with bobby pins. Use at least two bobby pins to keep the bun in place.
- Smooth down any flyaways with a brush or comb. This will help to keep the bun neat and tidy.
People Also Ask About How To Do A Military Bun
What is the difference between a military bun and a regular bun?
A military bun is a type of bun that is specifically designed for military personnel. It is similar to a regular bun, but it is typically tighter and more secure. This is because military personnel need to be able to keep their hair out of their faces and away from their necks when they are working.
How often should I wash my hair if I wear a military bun?
The frequency with which you need to wash your hair will depend on your hair type and how much you sweat. If you have oily hair, you may need to wash it more often than someone with dry hair. If you sweat a lot, you may also need to wash your hair more often. In general, it is a good idea to wash your hair at least once a week, even if you are not wearing a military bun.
Can I wear a military bun if I have short hair?
Yes, you can wear a military bun even if you have short hair. However, you may need to use more bobby pins to keep the bun in place. You may also want to consider using a hair donut or other hair accessory to help create the bun.
