4 Easy Steps to Ollie on a Tech Deck

Have you witnessed skateboarding tricks performed by professional skaters and longed to emulate their flair? With a Tech Deck, you can experience the thrill of skateboarding right at your fingertips. The ollie, the cornerstone of any skater’s repertoire, is a foundational maneuver that elevates your gameplay and opens up a vast array of possibilities. In this comprehensive guide, we will delve into the intricacies of executing a flawless ollie on your Tech Deck, unlocking a world of skateboarding maneuvers.

To initiate the ollie, position your index finger on the tail and your middle finger on the front of the Tech Deck. As you prepare to execute the trick, visualize the motion in stages. First, swiftly push down on the tail with your index finger while simultaneously flicking your wrist upwards with a quick, nimble motion. This combined action propels the Tech Deck into the air. Subsequently, as the deck reaches its apex, level it out by sliding your middle finger forward along the top of the board. By coordinating these movements with precision, you will achieve the signature “pop” and controlled ascent of an ollie.

Perfecting the ollie requires patience and repetition. Dedicate time to practicing the individual components of the motion until they become second nature. Gradually increase the force and speed of your flicking motion to gain more height. Moreover, experiment with leveling out the deck at different points in its trajectory, allowing you to control the height and angle of your ollie. With consistent practice and refinement, you will master this essential skateboarding maneuver, paving the way for more advanced tricks and an immersive Tech Deck experience.

Perfecting the Pop

The pop is the initial upward motion that propels the deck into the air. To execute a perfect pop, follow these detailed steps:

Position your thumb on the front two bolts:

Use your thumb to apply downward pressure on the front two bolts of the deck, creating a stable base for the pop.

Curve your middle finger:

Bend your middle finger into a slight curve and place it on the tail of the deck, ensuring it rests at the bottom edge near the back truck.

Flick your middle finger upward:

With a quick and forceful motion, flick your middle finger upward in a snapping motion. Aim to hit the edge of the tail squarely to generate maximum pop.

Apply immediate pressure with your thumb:

As soon as you flick the tail, simultaneously apply downward pressure with your thumb on the bolts to stabilize the pop and control the direction of the board.

Slide your thumb forward:

Once the board has reached its peak height, slide your thumb forward towards the edge of the deck to level it out and allow it to rotate under your feet.

Finger placement	Thumb: Front two bolts, Middle finger: Bottom edge of tail near back truck
Motion	Flick middle finger upward in a snapping motion, apply downward pressure with thumb simultaneously
Control	Slide thumb forward to level out and rotate the board

Achieving Optimal Finger Position

Mastering an ollie on a Tech Deck hinges on precise finger placement. Here’s a detailed guide to achieve optimal positioning:

**1. Front Finger (Load):**

Place the tip of your front finger slightly behind the front truck, angled slightly upward.
Apply downward pressure to “load” the deck, creating tension for the pop.

2. Back Finger (Flick):

Position the tip of your back finger directly behind the back truck, slightly off-center toward the opposite edge of the deck.
Practice flicking your finger quickly and sharply, aiming toward the center of the deck, diagonally upward and forward.

3. Thumb (Stability):

Support the deck with your thumb from below, positioned at its center or slightly towards the back.
Maintain light pressure while flicking, preventing the deck from spinning out of control.

Transitioning to the Slide

The transition from the flick to the slide is a crucial step in executing an Ollie. Here’s how to smoothly shift your finger from the flicking motion to the sliding one:

Start by practicing the flick. Once you’re comfortable with the flicking motion, practice transitioning to a slide by placing your finger slightly behind the flick point.
As you flick, keep your finger in contact with the board. Instead of abruptly stopping the flick, gradually reduce the force and allow your finger to slide down the board.
Control the slide. As your finger slides, apply gentle pressure to the nose of the board, pulling it up. This will help level out the board and initiate the pop.
Maintain contact. Keep your finger in contact with the board throughout the slide. By controlling the slide, you can fine-tune the height and rotation of the Ollie.

Flick	Slide
Finger placement: Slightly in front of nose	Finger placement: Behind flick point
Abrupt stop	Gentle pressure reduction
No finger contact with board after flick	Sustained finger contact throughout slide

Master the Flip

The ollie is a fundamental skateboarding trick that involves jumping into the air while simultaneously leveling out the board with your feet. Mastering the ollie on a Tech Deck requires practice and coordination, but it can be broken down into four main steps:

**Position your fingers:** Place your index finger on the tail of the deck and your thumb on the nose.
**Load the board:** Press down on the tail with your index finger, creating tension in the deck.
**Flick the nose:** Quickly flick your thumb forward and upward, as if you’re flicking a marble.
Level out the board:** As the board flips into the air, use your finger on the tail to level it out by gently dragging it forward until it’s parallel to the ground.

Leveling Out the Board

Leveling out the board is a crucial step in performing a successful ollie. The timing and technique used during this step play a significant role in the board’s stability and the execution of the trick. To effectively level out the board:

Maintain a slight downward angle on the tail: As you drag the finger on the tail forward, ensure that the tail remains slightly tilted downwards. This ensures that the board continues to rotate forward and levels out properly.
Smooth and controlled movement: Avoid jerky or sudden motions when dragging the tail. Instead, use a smooth and gradual motion to level out the board. This helps maintain control and prevents the board from flipping too far forward or backward.
Adjust based on the flip: The amount of upward flick you apply to the nose will affect the height and angle of the board’s flip. Pay attention to the rotation and adjust the angle of the tail accordingly to level it out successfully.

Maintaining Balance

1. Bend Your Knees and Keep Your Back Straight

Maintain a stable stance by slightly bending your knees and keeping your back straight. This positioning provides the necessary flexibility and control for executing the ollie.

2. Position Your Feet

Place your dominant foot (usually the front foot) slightly behind the Tech Deck’s front bolts. Your back foot should be near the tail end, with your toes slightly hanging off the edge.

3. Pop the Tail

Use your back foot to apply downward pressure on the tail of the Tech Deck. This action causes the board to lift into the air, creating the initial momentum for the ollie.

4. Level the Board

As the board rises, slide your front foot forward and level it with the back foot. This movement flips the board into a horizontal position, establishing its trajectory.

5. Control the Landing

To successfully land the ollie, it’s crucial to control the board’s descent. Use your front foot to guide the board’s nose downward, bringing it parallel to the ground. Simultaneously, use your back foot to tuck in the tail, ensuring a smooth landing.

Key Points for Landing Control:

– Guide the nose downward with your front foot

– Tuck in the tail with your back foot

– Aim for a gentle and controlled landing

Overcoming the Learning Curve

Mastering the Ollie on a Tech Deck requires patience and dedication. Here are some tips to help you tackle the learning curve:

1. Practice Regularly

Consistency is key to success. Aim to practice for at least 30 minutes each day, focusing on timing and coordination.

2. Use a Smooth Surface

Skate on a clean, flat surface to minimize friction and enhance stability.

3. Start with Stationary Flips

Begin by practicing the Ollie motion without moving, focusing on the flick and jump.

4. Pay Attention to Timing

The timing of your flick and jump is crucial. Snap your finger downward as you jump to generate upward force.

5. Don’t Get Discouraged

Learning the Ollie takes time and effort. Don’t get discouraged by setbacks, and keep practicing.

6. Troubleshoot Common Mistakes

Analyze your attempts and identify common mistakes. Here are some specific issues and their solutions:

Issue	Solution
Deck not flipping	Increase the force of your flick or adjust the angle of your finger
Deck flipping too far	Decrease the force of your flick or slow down your jump
Deck spinning vertically	Flick your finger more horizontally to prevent the board from spinning

Troubleshooting Common Errors

If you’re having trouble landing ollies, try troubleshooting these common errors:

1. Tail Not Hitting Ground

Make sure your tail is hitting the ground firmly. If it’s not, you’re not getting enough leverage to pop the board.

2. Foot Coming Off Board

Keep your front foot planted on the board. If it comes off, you’ll lose control of the ollie.

3. Not Jumping High Enough

Bend your knees and jump up high. The higher you jump, the higher your ollie will be.

4. Back Foot Not Sliding Forward

Slide your back foot forward after popping the tail. This will help level out the board and make the ollie more stable.

5. Front Foot Not Leveling Out

Keep your front foot level as you slide it forward. If it’s angled too far up or down, the ollie will be unbalanced.

6. Body Weight Too Far Back

Keep your weight centered over the board. If it’s too far back, the ollie will be nose-heavy and won’t pop well.

7. Timing of Pop and Slide

The key to consistent ollies is timing the pop of the tail with the slide of your back foot. Here’s a detailed breakdown of the timing:

Phase	Action
1. Pop	Quickly snap your back foot down to hit the tail.
2. Slide	About 0.05 seconds after the pop, start sliding your back foot forward.
3. Level Out	As your back foot reaches the bolts, level out your front foot.

Advanced Techniques for Skilled Ollyists

Once you’ve mastered the basics, you can start to experiment with more advanced Ollie techniques. These techniques will allow you to perform more complex tricks and flips.

Advanced Ollie Techniques

1. The Nollie

The Nollie is an Ollie that is performed with your back foot on the nose of the board and your front foot on the tail. This technique is a great way to add some variety to your Ollie tricks.

2. The Switch Ollie

The Switch Ollie is an Ollie that is performed with your feet in the opposite stance. This technique can be tricky to master, but it’s a lot of fun once you get it down.

3. The Inward Heel Flip

The Inward Heel Flip is a flip trick that is performed by flicking the board with your back foot and then using your front foot to control the board’s rotation.

4. The Kickflip

The Kickflip is a flip trick that is performed by flicking the board with your front foot and then using your back foot to control the board’s rotation.

5. The 360 Ollie

The 360 Ollie is a flip trick that is performed by doing a 360-degree spin on the board while in the air.

6. The Shove-it

The Shove-it is a flip trick that is performed by flicking the board with your front foot and then using your back foot to control the board’s rotation.

7. The Varial Flip

The Varial Flip is a flip trick that is performed by doing a 360-degree spin on the board while in the air and then flicking the board with your front foot.

8. The Impossible

The Impossible is a difficult flip trick that is performed by doing a 360-degree spin on the board while in the air and then flicking the board with your back foot. This trick is considered to be one of the most difficult tricks in skateboarding.

Trick Name	Description
Nollie	Ollie performed with back foot on nose and front foot on tail
Switch Ollie	Ollie performed with feet in opposite stance
Inward Heel Flip	Flip trick performed by flicking board with back foot and controlling rotation with front foot
Kickflip	Flip trick performed by flicking board with front foot and controlling rotation with back foot
360 Ollie	Flip trick performed by doing a 360-degree spin on the board while in the air
Shove-it	Flip trick performed by flicking board with front foot and controlling rotation with back foot
Varial Flip	Flip trick performed by doing a 360-degree spin on the board while in the air and then flicking the board with your front foot
Impossible	Difficult flip trick performed by doing a 360-degree spin on the board while in the air and then flicking the board with your back foot

Safety Precautions for Aspiring Skaters

Wear Protective Gear

Protecting your body is crucial when skateboarding. Always wear a helmet that meets safety standards to shield your head from potential impacts. Additionally, consider knee and elbow pads to absorb shock and minimize injuries.

Choose the Right Deck

Selecting a deck that suits your skill level is essential. A wider and longer board provides more stability for beginners, while a narrower, shorter deck offers greater maneuverability for advanced skaters.

Inspect the Skate Surface

Before attempting an ollie, thoroughly inspect the skating surface. Look for cracks, bumps, or debris that can cause falls and injuries.

Survey Your Surroundings

Ensure that your surroundings are clear before performing tricks. Choose a spacious and unobstructed area to minimize the risk of collisions with pedestrians or obstacles.

Roll at a Comfortable Speed

When starting out, roll at a slow and steady pace that allows you ample time to balance and control the board.

Bend Your Knees

Keep your knees comfortably bent to absorb shocks and maintain balance while skateboarding.

Stay Alert and Focused

Pay attention to your surroundings and anticipate any potential hazards. Focusing on your task will help you avoid accidents.

Learn Basic Stance

Master the proper stance by placing your front foot behind the front bolts and your back foot over the back truck. This will provide you with optimal control over the board.

Practice Regularly

Consistency is key to mastering the ollie. Practice regularly, even for short periods, to improve your technique and confidence.

9. Start Slowly

Begin by practicing the ollie without jumping. Focus on popping the tail and sliding your front foot forward to level the board. Gradually increase the height of the ollie as you become more comfortable.

You can also use a curb or a small obstacle to help you pop the board higher. Start by practicing ollies over small obstacles and gradually increase the height as you progress.

Once you have mastered the basic ollie, you can start to add variations to the trick. Some popular ollie variations include the kickflip, the backside ollie, and the nollie.

The Art of Ollie on a Tech Deck

1. Preparation

Gather a Tech Deck and a surface to practice on.
Ensure the Tech Deck is well-balanced on the surface.

2. Stance

Place your fingers on the deck, one on the front truck and one on the back.
Keep your thumbs slightly behind the trucks for added control.

3. The Flick

Use your thumb to quickly flick the tail of the deck downwards.
The flick should be sharp and precise, with your thumb hitting the tail at an angle.

4. The Pop

Simultaneously with the flick, use your index finger to push down on the nose of the deck.
The pop should create a slight upward force, lifting the board off the surface.

5. The Slide

As the board pops, slide your index finger forward along the nose.
This will help the board level out in the air.

6. The Catch

As the board reaches its peak height, catch it with your other hand.
Use your fingers to gently guide it back to the ground.

7. The Landing

Land the board gently on the surface.
Keep your fingers slightly above the trucks to prevent damage.

8. Practice and Patience

Mastering the ollie takes time and practice.
Don’t get discouraged and keep trying until you get it right.

9. Troubleshooting

If the board doesn’t pop, try flicking harder or pushing down on the nose with more force.
If the board flips too much, try flicking at a less extreme angle.

10. Advanced Ollie Techniques

Technique	Description
Kickflip	Rotating the board 360° with a side flick
Heelflip	Rotating the board 360° with a heel flick on the nose
Varial Flip	Rotating the board 360° along the X-axis
Laser Flip	Combining a kickflip with a varial flip

How To Do Ollie On Tech Deck

An ollie is a skateboarding trick where the skateboarder jumps into the air while the board stays attached to their feet. It is one of the most basic and essential tricks in skateboarding, and it can be used to clear obstacles, perform other tricks, or simply add some style to your riding. Here’s a step-by-step guide on how to do an ollie on a Tech Deck:

Position your feet on the board. Your front foot should be placed just behind the front bolts, and your back foot should be placed just in front of the back bolts. Your feet should be roughly parallel to each other, with your front foot pointing slightly forward and your back foot pointing slightly backward.
Bend your knees and crouch down. This will give you the power and momentum you need to jump into the air.
Pop the tail of the board. To do this, use your back foot to push down on the tail of the board, as if you were trying to break it. This will cause the board to pop up into the air.
Slide your front foot forward. As the board pops up, slide your front foot forward along the deck, as if you were trying to push the nose of the board into the air. This will cause the board to level out and rise into the air.
Lift your back foot. As your front foot slides forward, lift your back foot off the board. This will help the board to rotate in the air.
Land on the bolts. Once the board has rotated in the air, land on the bolts with both feet. Bend your knees slightly to absorb the impact.

With a little practice, you’ll be able to ollie on your Tech Deck with ease. Just remember to be patient and keep practicing, and you’ll eventually master this essential skateboarding trick.