Are you looking for a unique way to display your favorite skate deck? Hanging it on the wall is a great option! Not only will it add a touch of personality to your space, but it’s also a great way to store it when you’re not skating so it does not take up space in your home.
The first thing you need to do is choose the right spot to hang it. Skate decks come in all different sizes, so make sure you choose a spot that is large enough to accommodate it. You’ll also want to make sure that the spot is visible, so people can see your deck and admire its beauty and craftsmanship. Finally, you’ll need to decide how you want to hang it. There are a few different ways to do this, so choose the method that works best for you.
Once you have chosen the spot and method, it’s time to hang the deck. If you’re using nails, simply hammer them into the wall at the appropriate spots. If you’re using screws, you’ll need to drill pilot holes first. Once the nails or screws are in place, simply hang the deck on them. Now that your deck is hung, you can enjoy it for years to come! It’s a great way to show off your love of skateboarding, and it’s also a great conversation starter. So next time you’re looking for a way to add some personality to your space, consider hanging a skate deck on the wall.
Drilling the Pilot Holes
Measuring and marking the hanger hole locations precisely is crucial for a secure wall mount. To ensure accuracy, align the deck with the mounting surface and use a level to guarantee horizontal placement. Once satisfied with the positioning, secure the deck temporarily using masking tape or clamps.
Before drilling, select a drill bit that is slightly smaller than the screw you will be using. Drilling pilot holes prevents the wood from splitting and ensures a snug fit for the screws. Use a low drill speed and apply minimal pressure to avoid damaging the deck.
Drilling Depth and Countersinking
The depth of the pilot holes depends on the thickness of the deck and hanger baseplate. Typically, the holes should be approximately 60% of the baseplate thickness. For example, if your baseplate is 6mm thick, drill pilot holes about 3.5mm deep.
To create a clean finish, countersink the pilot holes slightly using a larger drill bit or a countersink tool. Countersinking creates a slight recess around the hole, allowing the screw head to sit flush with the hanger baseplate.
| Deck Thickness | Drill Bit Diameter | Pilot Hole Depth |
|---|---|---|
| 8mm | 2.5mm | 4.8mm |
| 10mm | 3mm | 6mm |
Installing the Mounting Screws
The most common way to hang a skate deck on a wall is to use mounting screws. This method is relatively simple and inexpensive, and it provides a secure hold. To install the mounting screws, you will need the following materials:
- Two mounting screws
- A screwdriver
- A level
- A pencil
Instructions:
1. Decide where you want to hang the skate deck on the wall. Use a level to make sure that the location is level.
2. Mark the location of the mounting screws on the wall with a pencil. The screws should be spaced about 16 inches apart.
3. Drill pilot holes at the marked locations. The pilot holes should be slightly smaller than the diameter of the mounting screws.
4. Insert the mounting screws into the pilot holes. Tighten the screws until they are snug against the wall.
5. Place the skate deck over the mounting screws. The deck should rest on the screws and be held in place by the mounting screws.
Tips:
* To ensure that the skate deck is hung securely, use large enough screws and make sure that the screws are securely tightened into the wall.
* If you are hanging the skate deck in a high-traffic area, consider using a longer screw or a molly bolt for added strength.
* To prevent the skate deck from scratching the wall, you can place a piece of felt or rubber between the deck and the wall.
* If you want to hang the skate deck at an angle, you can use a French cleat to secure the deck to the wall.
Drilling Pilot Holes
Using the drill bit size recommended for your wall anchors, create pilot holes at each screw hole location on the deck. The holes should be slightly deeper than the length of the anchors. If you’re using drywall anchors, drill a slightly smaller hole that the anchor can expand into.
Inserting Wall Anchors
Fit the wall anchors into the pilot holes. Use a hammer or drill to gently tap them into place until they are flush with the wall surface. If you’re using drywall anchors, squeeze the wings together and insert the anchor through the hole. Release the wings to expand the anchor inside the wall.
Leveling and Aligning the Deck
Measuring and Marking the Wall
Use a level to determine the horizontal center of the deck and transfer this measurement to the wall. Mark the wall at the center point.
Positioning the Deck
Hold the deck against the wall, aligning the center mark on the deck with the center mark on the wall. Use a level to ensure that the deck is level both horizontally and vertically.
Securing the Top Corners
Drive screws into the top corners of the deck, securing it to the wall. These screws will prevent the deck from pivoting or moving.
Securing the Bottom Edge
Install wall anchors along the bottom edge of the deck. This will provide additional support and prevent the deck from sagging.
Tightening the Screws
Tighten all of the screws securely, making sure not to overtighten. The deck should be firmly mounted to the wall without any signs of movement.
Securing the Deck in Place
Once you have the mounting holes drilled, it’s time to secure the deck in place. Here’s how to do it:
1. Insert the screws
Take the screws that came with the mounting kit and insert them into the mounting holes. Don’t tighten them all the way yet.
2. Align the deck
Hold the deck up to the wall and align it with the mounting holes. Make sure it’s level and centered.
3. Tighten the screws
Once the deck is aligned, tighten the screws until they are snug. Don’t overtighten them, or you could damage the deck.
4. Check the stability
Once the screws are tightened, check the stability of the deck. Give it a gentle shake to make sure it’s securely mounted.
5. Hang the deck
If the deck is stable, you can now hang it on the wall. Simply lift it up and place it on the screws.
6. Secure the deck with a strap
For added security, you can secure the deck with a strap. This will help to prevent it from falling off the wall, especially if it’s a heavy deck.
7. Enjoy your new wall art
Your skateboard deck is now securely mounted on the wall. You can now step back and admire your new work of art.
Tips for securing the deck in place
Here are a few tips for securing the deck in place:
- Use the correct screws for the type of wall you have.
- Make sure the screws are long enough to penetrate the wall and provide a secure hold.
- Don’t overtighten the screws, or you could damage the deck.
- Use a level to make sure the deck is hung straight.
- Hang the deck in a place where it won’t be knocked off the wall.
Screw Size Wall Type #8 x 1-1/4 inch Drywall #10 x 1-1/2 inch Plaster #12 x 2 inch Wood #14 x 2-1/2 inch Concrete Protecting the Deck from Damage
To ensure your skate deck remains pristine before and after hanging it, follow these steps to prevent damage:
1. Remove the Trucks and Wheels
Detach the trucks (axles) and wheels to eliminate pressure on the board and reduce the risk of cracking.
2. Clean the Deck
Wipe down the deck with a damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials.
3. Dry the Deck
Allow the deck to air dry completely before handling it further.
4. Cover Metal Parts with Tape
Apply painter’s tape or masking tape to the edges of the grip tape, overhangs, and any metal parts to prevent scratching and chipping.
5. Choose Suitable Hanging Hardware
Select wall-mount hardware designed specifically for skate decks, which provide ample support and weight distribution.
6. Mount the Hardware
Follow the manufacturer’s instructions to install the hardware securely into the wall, ensuring it is level and sturdy.
7. Position the Deck
Align the center of the deck with the mounted hardware and gently lift it into place.
8. Secure the Deck
Tighten the nuts or screws provided with the hardware to hold the deck firmly against the wall.
9. Additional Precautions
Consider these extra measures for further protection:
Precaution Explanation Use a Deck Display Case Encloses the deck, shielding it from UV rays, dust, and other elements. Apply a Clear Coat Protects the deck from moisture, scratches, and fading. Hang the Deck Horizontally Reduces stress on the deck, as it is not vertically loaded. How to Hang a Skate Deck on the Wall
Hanging a skateboard deck on the wall is a great way to display your favorite graphics, support your local skate shop, or simply add a cool piece of art to your room. It’s also a relatively easy project that can be completed in a few simple steps.
To start, you’ll need the following materials:
- Skateboard deck
- Two screws
- Drill
- Screwdriver
- Level (optional)
Once you have your materials, follow these steps to hang your skate deck on the wall:
- Find the center of the deck. You can do this by measuring the length of the deck and dividing it in half.
- Mark the center of the deck with a pencil.
- Drill a pilot hole at the center of the deck.
- Insert a screw into the pilot hole and tighten it until it is snug.
- Repeat steps 3 and 4 on the other side of the deck.
- Hang the deck on the wall by the screws. You can use a level to make sure that the deck is hanging straight.
That’s it! You have now successfully hung a skateboard deck on the wall.
People Also Ask
How do you hang a skateboard deck without nails?
There are a few ways to hang a skateboard deck without nails. One way is to use adhesive strips. Another way is to use a deck mount that attaches to the wall without the need for nails.
What is the best way to hang a skateboard deck?
The best way to hang a skateboard deck is to use screws. This method is simple, secure, and does not damage the deck.
Can you hang a skateboard deck on drywall?
Yes, you can hang a skateboard deck on drywall. However, it is important to use screws that are long enough to reach into the studs behind the drywall.
