Skateboarding is a popular sport that can be enjoyed by people of all ages. One of the best things about skateboarding is that it can be done almost anywhere. However, if you don’t have a lot of space, you may be wondering how to store your skateboard. One option is to hang it on the wall. This is a great way to save space and keep your skateboard out of the way when you’re not using it. Furthermore, it can also be a great way to display your skateboard as a piece of art.
There are a few different ways to hang a skateboard on the wall. One option is to use a skateboard wall mount. These mounts are typically made of metal or plastic and are designed to hold your skateboard securely on the wall. Another option is to use a nail or screw. However, if you use this method, you will need to be careful not to damage your skateboard. Finally, you can also use a piece of string or wire to hang your skateboard on the wall. This is a simple and inexpensive option, but it is not as secure as using a skateboard wall mount.
Once you have chosen a method for hanging your skateboard on the wall, you will need to find a suitable location. The best place to hang your skateboard is in a dry, well-ventilated area. You should also make sure that the location is out of the way of foot traffic. Once you have found a suitable location, you can begin hanging your skateboard on the wall. Follow the instructions for the method you have chosen and be sure to use the appropriate hardware. With a little effort, you can easily hang your skateboard on the wall and keep it out of the way when you’re not using it.
Materials You’ll Need
Essential Tools and Hardware
To hang a skateboard deck securely and aesthetically, it’s crucial to gather the right tools and hardware. First and foremost, you’ll require a reliable drill with a drill bit suitable for the type of wall you’ll be mounting the deck on. Additionally, you’ll need a level to ensure the deck is hung straight, and a tape measure or ruler for accurate placement.
Regarding hardware, you’ll need appropriate screws or bolts with matching washers to mount the deck to the wall. The type of screws or bolts you choose will depend on the material of the wall and the weight of the skateboard deck. Drywall anchors may be necessary if you’re mounting the deck on a wall made of drywall or other soft materials.
Optional Enhancements
For a more polished and eye-catching display, you can consider incorporating additional elements. A piece of felt or fabric can be placed between the deck and the wall to prevent scratches and provide a bit of cushioning. You might also want to use decorative hooks or hangers to hold the deck in place, adding a touch of style to your skateboarding decor.
Handy Tools and Accessories
To ensure a smooth and hassle-free hanging process, consider using a stud finder to locate studs within the wall, providing a more secure mount for the screws or bolts. A cordless screwdriver can also come in handy, allowing you to quickly and efficiently drive the screws or bolts into place without the need for a manual screwdriver.
| Essential Tools | Optional Enhancements | Handy Accessories |
|---|---|---|
| Drill with appropriate drill bit | Felt or fabric for cushioning | Stud finder |
| Level | Decorative hooks or hangers | Cordless screwdriver |
| Tape measure or ruler |
Preparing Your Wall and Deck
Preparing Your Wall
Before hanging your skateboard deck, it’s crucial to ensure your wall is ready. Follow these steps:
- Choose a Hanging Method: Select a hanging method that aligns with your wall type and deck preference. Common options include nails, screws, hooks, or mounting brackets.
- Clean and Prepare the Wall Surface: Clean the wall surface thoroughly to remove any dirt or debris. Roughen slightly textured walls with sandpaper to enhance adhesive bonding.
- Mark and Pre-Drill Holes: Determine the desired placement of your deck and mark the hanging points. If using nails or screws, pre-drill pilot holes to prevent splitting the wood.
Preparing Your Deck
To ensure your skateboard deck is ready for hanging, consider the following steps:
- Remove Rust and Debris: If your deck has any rust spots or debris, clean it using a wire brush or sandpaper.
- Protect the Surface: Apply a thin layer of clear sealant to the surface of your deck to guard against scratches and discoloration. Allow it to dry completely.
- Drill Holes for Hanging: If your deck lacks pre-drilled holes, use a power drill to create mounting points that align with your chosen hanging method.
| Hanging Method | Required Tools |
|---|---|
| Nails | Hammer, nails |
| Screws | Screwdriver, screws |
| Hooks | Hooks, hammer or screwdriver |
| Mounting Brackets | Mounting brackets, screws, screwdriver |
Measuring and Marking the Placement
Before drilling any holes into your walls or skateboard deck, it’s crucial to carefully plan and mark the desired placement of your skateboard deck. This will ensure that the display is level, visually appealing, and secure.
To ensure precision, use a level and tape measure. Determine the center point of the skateboard deck and transfer it to the wall using a pencil or masking tape. Mark the points where the deck will be mounted to the wall, ensuring that they are evenly spaced and securely fastened.
Advanced Measuring Techniques:
For a more precise and aesthetically pleasing display, consider employing advanced measuring techniques:
Centering on a Wall:
- Measure the length of the deck and divide by two to find the center point.
- Mark the center point on a piece of tape and fold it in half, creating a crease.
- Place the folded tape’s crease on the wall and mark the center point.
- Use the center point as a reference to mark the placement of the deck.
Multi-Deck Wall Arrangement:
When hanging multiple decks on a wall, it’s important to ensure they are aligned.
| Step | Description |
|---|---|
| 1 | Determine the center point of each deck. |
| 2 | Create a template using a piece of cardboard or plywood cut to the size of the deck. |
| 3 | Use a level to align the template on the wall and mark the center point. |
| 4 | Repeat steps 2-3 for each additional deck, ensuring the templates overlap slightly. |
| 5 | Remove the templates and connect the center points to create a level line that will guide the placement of the decks. |
Drilling Pilot Holes
Drilling pilot holes ensures that screws drive into the wall cleanly, minimizing the risk of splitting or damaging the wall. Here’s a step-by-step guide with added details:
1. Mark the Hole Locations
Align the deck template or the deck itself against the wall. Mark the locations for the two screws on the top template line. Using a spirit level, check if the deck is level before marking.
2. Choose the Correct Drill Bit
Select a drill bit that is slightly smaller in diameter than the screws. This will create a snug fit and prevent the screws from stripping or wobbling.
3. Drill the Holes
Apply gentle pressure and slowly drill pilot holes at the marked locations. Drill straight into the wall, perpendicular to the deck. The depth of the pilot holes should be slightly greater than the screw’s length by about 1/8 inch.
4. Countersink the Holes (Optional)
Countersinking creates a recessed area around the screw holes, allowing the screw heads to sit flush with the deck’s surface. To countersink the holes, use a countersink bit or a larger drill bit and drill a shallow indentation around each pilot hole, widening it slightly towards the surface.
Countersinking Chart:
| Screw Head Diameter | Countersink Bit Diameter |
|---|---|
| #6 | 1/8″ (3.18mm) |
| #8 | 3/16″ (4.76mm) |
| #10 | 1/4″ (6.35mm) |
Countersinking is not strictly necessary but improves the finished appearance of the mounted deck.
Screwing in the Mounting Hardware
Once you have determined the location and marked the holes, it’s time to screw in the mounting hardware. Here’s a step-by-step guide to help you do it right:
1. Align the Mounting Bracket
Place the mounting bracket over the marked holes on the wall, ensuring that it aligns properly with the skateboard deck.
2. Drill Pilot Holes
Using a drill and appropriate drill bit, create small pilot holes at each marked hole to help guide the screws.
3. Insert Screws
Take the screws provided with the mounting hardware and insert them into the pilot holes. Use a screwdriver or drill to tighten the screws securely.
4. Level the Deck
Once the screws are tightened, use a level to ensure that the skateboard deck is level on the wall. Adjust the screws as needed to achieve a perfect alignment.
5. Tighten the Deck
After leveling the deck, fully tighten the screws using a screwdriver or drill. Apply gentle but firm pressure to ensure that the deck is secure and will not wobble or fall.
| Step | Description |
|---|---|
| 1 | Align the mounting bracket on the wall. |
| 2 | Drill pilot holes for the screws. |
| 3 | Insert and tighten the screws. |
| 4 | Level the skateboard deck using a spirit level. |
| 5 | Fully tighten the screws to secure the deck. |
Hanging the Deck on the Wall
To hang the deck on the wall, you’ll need a few basic tools:
- Drill
- Screwdriver
- Level
- Pencil
- 2 or 4 screws
- Optional: stud finder
Once you have gathered your tools, follow these steps:
- Decide where you want to hang the deck and mark the desired height on the wall.
- Use a level to ensure that the line you have marked is straight.
- If possible, use a stud finder to locate the nearest stud. Studs provide stronger support than drywall alone.
- Drill pilot holes for the screws into the marked spot, at least 1 inch deep.
- Align the deck with the pilot holes and insert the screws. Start by hand-tightening the screws, then use a screwdriver to secure them fully.
- Double-check the sturdiness of the hanging by gently tugging on the deck. Adjust the screws or use additional screws if necessary.
Screw Size and Grip
The appropriate screw size depends on the thickness of the deck and the type of wall you’re hanging it on. For most decks, 1 or 1.5-inch screws are sufficient. For drywall, you may need longer screws or drywall anchors for added support.
To ensure a secure grip, use coarse-threaded screws that are slightly wider than the pilot holes. Counterbore the screws about 1/8 inch below the surface of the deck to create a more flush appearance.
| Deck Thickness | Screw Length |
|---|---|
| 5/8 inch | 1 inch |
| 7/8 inch | 1.5 inches |
Angling for Vertical or Horizontal Display
The orientation of your skateboard deck on the wall depends on personal preference and available space. Consider the following tips:
Vertical Display:
- For a more dynamic and eye-catching display, hang the deck vertically.
- Use two angled hangers, one at the top and one at the bottom, to secure the deck.
Horizontal Display:
- For a more traditional and space-efficient display, hang the deck horizontally.
- Use two or more evenly spaced hooks or hangers along the length of the deck.
- If hanging horizontally over a door, use removable hooks to avoid damaging the door frame.
Tips for Angling Vertical or Horizontal Display
Vertical Display:
- Hang the deck slightly angled towards the wall (approximately 15-20 degrees) for a more visually appealing display.
- If the deck is heavy, use additional hangers or support to prevent it from sagging.
Horizontal Display:
- Hang the deck level and flush with the wall for a clean and minimalist look.
- If the deck is wide, use additional hooks or hangers to distribute the weight evenly.
- For a more artistic touch, hang multiple decks vertically or horizontally in a staggered pattern.
- Use clear or colored display hooks to complement the skateboard’s design.
Adding Decorative Elements
Once your deck is mounted, you can add decorative elements to enhance its visual appeal. Consider the following ideas:
- Paint or stain: Customize your deck with a coat of paint or stain. Choose colors and patterns that complement your decor or express your personality.
- Art prints: Showcase your passion for skateboarding by framing art prints of famous skaters, skate parks, or iconic board designs.
- Decals or stickers: Add a personal touch with decals or stickers featuring your favorite brands, logos, or artwork.
- LED lights: Illuminate your deck with LED lights to create a unique and eye-catching display, especially in dimly lit areas.
- Plants: Bring a touch of nature indoors by hanging small plants around or on your deck. Choose plants that complement the overall aesthetic of your space.
- Shelves or racks: Utilize shelves or racks to store and display other skate-related items, such as helmets, shoes, or accessories.
- Mirrors: Install a mirror nearby to add depth and reflect the beauty of your mounted deck.
- Educational materials: Showcase your knowledge of skateboarding history or techniques by displaying books, magazines, or posters.
| Decorative Element | Description |
|---|---|
| Paint or Stain | Customize the deck with colors and patterns |
| Art Prints | Display prints of famous skaters, skate parks, or board designs |
| LED Lights | Illuminate the deck for a unique display |
Ensuring a Secure Hold
9. Securing the Deck with Wall Anchors
For the most robust hold, employing wall anchors is highly recommended. These devices provide exceptional support by distributing the weight of the skateboard deck evenly across the wall. They come in various sizes and materials, such as plastic, metal, and heavy-duty toggle bolts. To install wall anchors effectively:
| Step 1: Determine Anchor Spacing | Position the skateboard deck against the wall and mark the desired mounting holes. Measure the distance between the holes. |
|---|---|
| Step 2: Drill Pilot Holes | Using a drill bit slightly smaller than the anchor diameter, create pilot holes at the marked locations. |
| Step 3: Insert Anchors | Insert the wall anchors into the pilot holes. Depending on the anchor type, you may need to hammer them in or use a screwdriver. |
| Step 4: Align Deck and Insert Screws | Align the skateboard deck with the wall anchors. Insert screws through the mounting holes and tighten them into the anchors. Ensure the deck is level and securely fastened. |
By following these steps meticulously, you can guarantee that your skateboard deck is securely mounted on the wall, showcasing your prized possession with confidence.
Tips for Different Types of Decks
1. Classic Skateboard Deck
Classic skateboard decks are the most common type of deck, and they’re easy to hang on the wall. Here are the steps:
- Measure and mark the center of the deck on the wall.
- Position the deck on the wall and insert the screws through the holes in the deck.
- Tighten the screws until the deck is securely attached to the wall.
2. Longboard Deck
Longboard decks are longer and wider than classic skateboard decks, so you’ll need to use different hardware to hang them on the wall. Here are the steps:
- Purchase special longboard mounting brackets.
- Position the brackets on the deck and screw them in.
- Hang the deck on the wall using the included screws.
3. Mini Skateboard Deck
Mini skateboard decks are smaller than classic skateboard decks, so you can use the same hardware to hang them on the wall. Here are the steps:
- Measure and mark the center of the deck on the wall.
- Position the deck on the wall and insert the screws through the holes in the deck.
- Tighten the screws until the deck is securely attached to the wall.
4. Penny Board Deck
Penny board decks are very small and lightweight, so you can hang them on the wall using Command strips or other adhesive products. Here are the steps:
- Clean the wall and the back of the deck with rubbing alcohol.
- Apply the Command strips to the back of the deck.
- Press the deck against the wall and hold it for 30 seconds.
5. Cruiser Skateboard Deck
Cruiser skateboard decks are a bit larger than penny board decks, but they’re still lightweight enough to hang on the wall using Command strips or other adhesive products. Here are the steps:
- Clean the wall and the back of the deck with rubbing alcohol.
- Apply the Command strips to the back of the deck.
- Press the deck against the wall and hold it for 30 seconds.
6. Electric Skateboard Deck
Electric skateboard decks are heavier than traditional skateboard decks, so you’ll need to use specialized hardware to hang them on the wall. Here are the steps:
- Purchase special electric skateboard mounting brackets.
- Position the brackets on the deck and screw them in.
- Hang the deck on the wall using the included screws.
7. Freestyle Skateboard Deck
Freestyle skateboard decks are designed for performing tricks, so they’re often smaller and lighter than traditional skateboard decks. Here are the steps:
- Measure and mark the center of the deck on the wall.
- Position the deck on the wall and insert the screws through the holes in the deck.
- Tighten the screws until the deck is securely attached to the wall.
8. Old School Skateboard Deck
Old school skateboard decks are wider and heavier than modern skateboard decks, so you’ll need to use different hardware to hang them on the wall. Here are the steps:
- Purchase special old school skateboard mounting brackets.
- Position the brackets on the deck and screw them in.
- Hang the deck on the wall using the included screws.
9. Cruiser Deck
Cruiser decks are similar to classic skateboard decks, but they’re slightly longer and wider. Here are the steps:
- Measure and mark the center of the deck on the wall.
- Position the deck on the wall and insert the screws through the holes in the deck.
- Tighten the screws until the deck is securely attached to the wall.
10. Other Types of Decks
There are a variety of other types of skateboard decks available, including:
| Deck Type | Mounting Hardware |
|---|---|
| Slalom Skateboard Deck | Slalom skateboard mounting brackets |
| Surfskate Deck | Surfskate mounting brackets |
| Pool Skateboard Deck | Pool skateboard mounting brackets |
| Street Skateboard Deck | Street skateboard mounting brackets |
| Vert Skateboard Deck | Vert skateboard mounting brackets |
To hang these decks on the wall, simply follow the steps outlined above for the most similar type of deck.
How to Hang a Skateboard Deck on the Wall
Hanging a skateboard deck on the wall is a great way to display your favorite board or commemorate a special experience. It’s also a relatively simple project that can be completed in a few hours with just a few tools.
Here’s a step-by-step guide on how to hang a skateboard deck on the wall:
- Gather your materials. You will need the following:
- A skateboard deck
- Two mounting brackets
- Four screws
- A drill
- A screwdriver
- A level
- A pencil
- Decide where you want to hang the deck. Once you have your materials, you need to decide where you want to hang the deck. Find a spot that is out of the way but still visible. Use a level to make sure that the spot is level.
- Mark the location of the mounting brackets. Once you have decided where you want to hang the deck, you need to mark the location of the mounting brackets. Use a pencil to mark the top and bottom of each bracket on the wall.
- Drill pilot holes. Once you have marked the location of the brackets, you need to drill pilot holes for the screws. Use a drill bit that is slightly smaller than the screws that you are using.
- Install the mounting brackets. Once you have drilled the pilot holes, you can install the mounting brackets. Insert the screws into the pilot holes and tighten them until they are snug.
- Hang the skateboard deck. Once the mounting brackets are installed, you can hang the skateboard deck. Simply slide the deck onto the brackets and make sure that it is secure.
That’s it! You have now successfully hung a skateboard deck on the wall.
People Also Ask
How do I mount a skateboard deck horizontally?
To mount a skateboard deck horizontally, you will need to use two mounting brackets that are designed for horizontal mounting. These brackets will have two holes on the top and two holes on the bottom. Once you have the brackets, follow the steps above to install them on the wall.
Can I use nails to hang a skateboard deck?
It is not recommended to use nails to hang a skateboard deck. Nails are not as strong as screws and they can easily pull out of the wall, especially if the deck is heavy. Use screws instead for a more secure hold.
How high should I hang a skateboard deck?
The height at which you hang a skateboard deck is a matter of personal preference. However, most people hang their decks at about eye level. This allows them to easily see the deck and it also makes it easier to grab the deck when they want to skate.
