10 Easy Steps and Trick to Remove Pur Water Filter From Pitcher

Do you own a PUR water pitcher and find yourself wondering how to remove the water filter from it? Changing your filter regularly is crucial to ensure you’re drinking clean, healthy water. The good news is that the process of replacing your PUR water filter is quick and straightforward. In this comprehensive guide, we’ll provide step-by-step instructions and helpful tips to make the task effortless. Whether you’re a seasoned PUR pitcher user or just starting, this article will empower you with the knowledge to maintain your pitcher effectively.

Before delving into the specifics, let’s briefly discuss the significance of regularly changing your PUR water filter. As water passes through the filter, it traps contaminants like chlorine, lead, and other impurities. Over time, these contaminants can build up, reducing the filter’s effectiveness and potentially compromising the quality of your drinking water. Replacing your filter every two to three months, as recommended by PUR, ensures optimal performance and safeguards your water’s purity.

Now, let’s delve into the step-by-step guide on removing your PUR water filter. Gather your replacement filter and follow these simple steps: 1) Locate the small tab on the front of the pitcher’s lid. Press down on the tab and lift the lid. 2) Inside the pitcher, you’ll see the filter cartridge. Grip the cartridge firmly and pull it straight up to remove it. 3) Carefully insert the new filter cartridge into the pitcher, ensuring it’s properly seated. 4) Close the pitcher’s lid, making sure it snaps into place.Congratulations! You’ve successfully replaced your PUR water filter. Enjoy the peace of mind that comes with knowing your water is clean and safe for drinking.

Identifying the Filter Location and Type

Before removing the PUR water filter from your pitcher, it’s crucial to determine its location and type. Different PUR pitcher models may have unique filter configurations, so knowing where and what type of filter you’re dealing with will guide your removal process.

**Locating the Filter:**

Bottom of the Pitcher: In some PUR pitchers, the filter is located at the bottom of the reservoir. Look for a removable disc or cap where the filtered water dispenses from.
Inside the Lid: Other models have their filters housed within the pitcher’s lid. Remove the lid to access the filter compartment.
Vertical Tube: In certain designs, the filter is integrated into a vertical tube that extends into the pitcher’s reservoir. This tube may be attached to the lid or the base of the pitcher.

**Identifying the Filter Type:**

PUR offers various filter types, including:

Filter Type	Description
Basic Filter	Removes sediments, chlorine, taste, and odor
Maxion Filter	Removes heavy metals, pesticides, and certain contaminants
MineralClear Filter	Balances pH levels and adds essential minerals

Gathering Necessary Tools

Before embarking on the task of removing your PUR water filter from the pitcher, it is essential to gather the necessary tools to ensure a smooth and efficient process. The following list outlines the crucial items you will require:

1. Clean Cloth:

A clean, lint-free cloth is necessary for wiping down the pitcher and filter after removal. It helps prevent the transfer of any debris or contaminants into the water.

2. Wrench or Adjustable Pliers:

In certain models, a wrench or adjustable pliers may be required to loosen the filter cap. These tools provide the necessary leverage to unscrew the cap without damaging it or the pitcher.
It is recommended that you use a dedicated filter wrench if available, as it is designed specifically for this purpose and ensures a proper fit without causing damage. However, if you do not have access to a filter wrench, adjustable pliers can effectively serve as a substitute.

3. Replacement Filter (Optional):

If you intend to replace your old filter with a new one, having a replacement filter on hand is essential. Before purchasing a replacement filter, ensure that it is compatible with your specific PUR pitcher model.

Shutting Off Water Supply

Before you start servicing your PUR water filter, it’s important to shut off the water supply to your pitcher. This will prevent water from leaking out and creating a mess.

To shut off the water supply, follow these steps:


1.	Locate the water line that runs to your PUR pitcher. It should be a small, flexible tube.
2.	Follow the water line to the point where it connects to a faucet or water valve.
3.	If the water line is connected to a faucet, simply turn off the faucet. If the water line is connected to a water valve, turn the valve clockwise to shut off the water supply.

Disassembling the Pitcher

To remove the PUR water filter from the pitcher, you need to disassemble the pitcher. Here are the steps:

Start by removing the lid of the pitcher.
Next, remove the insert from the top of the pitcher.
Then, remove the water filter from the insert.
The insert in most PUR pitchers has a grey or blue knob at the bottom. Twist the knob in a counterclockwise direction to loosen the filter housing from the insert. Remove the filter housing from the insert.
Inside the filter housing, you’ll find the old water filter. Grip the filter and pull it straight out of the filter housing. Discard the old filter.

Now that you have disassembled the pitcher, you can proceed with cleaning the pitcher and replacing the PUR water filter with a new filter.

Locating the Filter

The filter in a PUR water pitcher is usually located at the bottom of the pitcher. To find it, you need to remove the lid and the water reservoir. The filter will be a small, cylindrical object with a blue cap.

1. Remove the lid.

The lid is usually held in place by a few tabs. Gently press on the tabs and lift the lid off.

2. Remove the water reservoir.

The water reservoir is the clear plastic container that holds the water. Lift the reservoir straight up to remove it.

3. Locate the filter.

The filter will be located at the bottom of the pitcher, where the water flows out. It will be a small, cylindrical object with a blue cap.

4. Remove the filter.

To remove the filter, grasp the blue cap and pull it straight up. The filter will come out with the cap.

5. Inspect the filter.

Once you have removed the filter, inspect it for any signs of damage or wear. If the filter is damaged, it should be replaced. You can also check the expiration date on the filter to see if it needs to be replaced.

Filter Type	Expiration Date
Basic	6 months
Advanced	1 year
Ultimate	1 year

Removing the Old Filter

1. **Locate the filter**: The filter is usually located at the bottom of the pitcher. It may be covered by a cap or lid.

2. **Remove the cap or lid**: If the filter is covered by a cap or lid, remove it by twisting or pulling it off.

3. **Grip the filter**: Once the cap or lid is removed, grip the filter by the handle or base.

4. **Pull the filter out**: Gently pull the filter straight up and out of the pitcher.

5. **Discard the old filter**: The old filter should be discarded according to the manufacturer’s instructions.

6. Cleaning the Filter Housing

Once the old filter is removed, it is important to clean the filter housing to ensure that the new filter will fit properly and perform optimally. Here are the steps for cleaning the filter housing:

Step	Instructions
1	Remove the old filter housing cap by twisting or pulling it off.
2	Use a clean, damp cloth to wipe down the inside of the filter housing.
3	If there is any mineral buildup on the filter housing, use a mild dish soap and a soft brush to remove it.
4	Rinse the filter housing thoroughly with clean water.
5	Allow the filter housing to dry completely before reinstalling the new filter.

Cleaning the Filter Compartment

To ensure the optimal performance of your PUR water filter, it’s essential to clean the filter compartment regularly. Here’s a step-by-step guide:

Materials Required:

Mild dish soap
Soft-bristled brush or sponge
Clean water
Towel

Steps:

Remove the water filter: Dispose of the old filter according to the manufacturer’s instructions.
Open the filter compartment: Locate the filter compartment lid and open it carefully.
Remove the filter holder: Gently lift the filter holder out of the compartment.
Wash the filter holder and compartment: Scrub the filter holder and the inside of the compartment with a soft-bristled brush or sponge and mild dish soap. Rinse thoroughly with clean water.
Disinfect the compartment: Fill the compartment with a solution of 1 teaspoon of chlorine bleach per gallon of water. Let it sit for 30 minutes to disinfect the area.
Rinse thoroughly: Drain the bleach solution and rinse the compartment and filter holder with clean water several times to remove any residual bleach.
Dry the compartment and filter holder: Use a clean towel to absorb excess moisture from the compartment and filter holder. Allow them to air-dry completely before reassembly. Tip:

For best results, clean the filter compartment every three months or after changing the filter, whichever comes first.
If the compartment has a buildup of mold or mildew, soak it in a bleach solution overnight before scrubbing.
Never place the filter holder or compartment in the dishwasher, as it can damage the plastic.

Installing the New Filter

Step 1: Remove The Old Filter

Grasp the old filter firmly and pull it straight up and out of the pitcher. If the filter is stuck, you can use a pair of pliers to gently pry it loose.

Step 2: Soak The New Filter

Fill a bowl or cup with cold water and soak the new filter for 15 minutes. This will help to remove any air bubbles from the filter and make it more effective.

Step 3: Rinse The Filter

After soaking, hold the filter under cold running water for 30 seconds. This will help to remove any residual charcoal dust from the filter.

Step 4: Insert The New Filter

Align the new filter with the opening in the bottom of the pitcher and insert it firmly. Make sure that the filter is seated properly and that the two tabs on the filter are locked into place.

Step 5: Fill The Pitcher

Fill the pitcher with cold water and allow it to sit for 5 minutes. This will help to activate the filter and remove any remaining air bubbles.

Step 6: Pour Out The First Two Pitchers

The first two pitchers of water that you filter should be poured out. This will help to flush out any remaining charcoal dust or impurities from the filter.

Step 7: Enjoy Your Filtered Water

Your PUR water filter pitcher is now ready to use. Enjoy your filtered water!

Step 8: Replace The Filter Regularly

It is important to replace your PUR water filter regularly to ensure that you are getting the best possible water quality. The frequency with which you need to replace your filter will depend on the quality of your water and how often you use your pitcher. However, as a general rule of thumb, you should replace your filter every 2 to 3 months. Here is a table with a recommended filter replacement schedule:

Usage	Replacement Schedule
Light	Every 6 months
Moderate	Every 3 months
Heavy	Every 2 months

Reassembling the Pitcher

Place the rubber gasket inside the funnel.
Align the filter holder with the funnel and twist to lock.
Insert the filter cartridge into the filter holder.
Fill the upper chamber with tap water.
Flush the filter by letting 2 or 3 tanks of water pass through it.
Discard the flushed water.
Fill the upper chamber again and let the water filter through.
The pitcher is now ready to use.
It is important to replace the filter cartridge every 2-3 months, or as per the manufacturer’s instructions, to ensure optimal performance.

Flushing the Filter

1. Remove the filter from the pitcher by grasping it at the base and pulling it straight up.

2. Rinse the filter under cold running water for 10-15 seconds.

3. Tap the filter gently on the counter to remove any excess water.

4. Insert the clean filter back into the pitcher.

5. Fill the pitcher with cold water and let the filter soak for 5 minutes.

6. Drain the water from the pitcher.

7. Repeat steps 4-6 three times.

8. Fill the pitcher with cold water and let it filter through the filter.

9. Discard the first two cups of filtered water.

10. Your Pur water filter is now ready to use.

Here is a more detailed explanation of step 10:

Step	Description
1	Discard the first two cups of filtered water.
2	This will help to remove any loose carbon particles from the filter.
3	After discarding the first two cups, your Pur water filter is ready to use.

How To Remove PUR Water Filter From Pitcher

Changing your PUR water filter regularly is important for maintaining the quality of your drinking water. Here are the steps on how to remove the old filter and install a new one:

1. Remove the lid from the pitcher.
2. Grip the filter housing and turn it counterclockwise to loosen it.
3. Pull the filter housing straight up to remove it.
4. Discard the old filter.
5. Insert the new filter into the filter housing, lining up the notch on the filter with the notch in the housing.
6. Push the filter housing down into the pitcher until it clicks into place.
7. Replace the lid on the pitcher.