5 Easy Steps to Slit Your Eyebrow

Are you ready to rock the latest eyebrow trend? Slit eyebrows, once considered a bold and edgy look, are now becoming more mainstream. Whether you’re aiming for a rebellious vibe or a touch of unconventional glamour, this trendy style is a perfect way to elevate your brow game. Slitting your eyebrows is a straightforward process that can be done at home with a few essential tools and a steady hand. So, get ready to unleash your inner artist and create a stunning, eye-catching look that will turn heads wherever you go.

Before you dive into the eyebrow-splitting adventure, it’s crucial to gather the necessary tools. You’ll need a sharp eyebrow razor, a pair of tweezers, a brow brush, and a spoolie. Start by brushing your eyebrows upward to expose any excess hair that needs to be trimmed. Then, using the eyebrow razor, carefully remove any stray hairs around the desired slit area. It’s essential to go slowly and avoid over-trimming, as you can always remove more hair but not add it back.

Now comes the moment of truth: creating the slit. Use the tweezers to pluck out a few hairs in a vertical line, starting from the arch of your brow. The length and width of the slit are up to your personal preference. If you’re not sure where to start, aim for a subtle slit about 3 millimeters long and 1 millimeter wide. Remember, you can always adjust the size later if needed. Once you’re satisfied with the placement and size of the slit, brush your eyebrows back into place and admire your fresh new look. Feel free to add a touch of brow gel or pomade to enhance the definition and hold the shape in place.

Preparation and Materials

Before You Start

Before you begin the slitting process, it’s crucial to ensure you have the necessary preparation and materials. Proper preparation will enhance the precision and reduce discomfort during the procedure.

Skin Preparation

Exfoliate: Gently exfoliate the area around your eyebrows to remove any dead skin cells or debris. This allows the razor or scissors to glide smoothly over your skin.
Cleanse and Dry: Thoroughly cleanse the brow area with a gentle cleanser and pat it dry to ensure no residue remains.
Apply Warm Compress: Place a warm compress over your eyebrows for a few minutes to soften the hair follicles and make them more pliable for cutting.

Equipment Gathering

Razor or Scissors: Choose a sharp eyebrow razor or small, pointed scissors. The sharpness of the cutting tool is essential for a precise and clean cut.
Eyebrow Brush: A clean eyebrow brush is needed to groom your brows after slitting.
Magnifying Mirror: A magnifying mirror provides a closer view and helps with accuracy during the slitting process.
Cotton Swabs: Cotton swabs are useful for cleaning up stray hairs or applying a disinfectant after slitting.
Disinfectant: A mild disinfectant, such as rubbing alcohol, can be used to sanitize the cutting tool and minimize the risk of infection.

Determining Your Arch Shape

Identifying your natural arch shape is crucial for shaping your eyebrows accurately. Here’s a guide to help you determine your arch:

1. Soft Arch: This type of arch has a subtle curve and a more rounded shape. It’s ideal for those with round faces as it helps create a lifted and more angular appearance.

2. Defined Arch: A defined arch is more angular and has a pronounced peak. It’s suitable for those with square or diamond-shaped faces, as it helps soften the sharp angles and create a more balanced look.

3. High Arch: This arch has the most dramatic curve and creates a lifted illusion. It’s recommended for those with long or oval faces, as it helps shorten the face and accentuate the eyes.

4. Rounded Arch: A rounded arch lacks a defined peak and instead has a smooth, continuous curve. It’s often found in those with naturally thick eyebrows and complements round or heart-shaped faces.

Arch Shape	Suitable for Face Shape
Soft	Round
Defined	Square, Diamond
High	Long, Oval
Rounded	Round, Heart

Measuring and Marking Your Eyebrows

To achieve the perfect eyebrow slit, meticulous measuring and marking are crucial. Here’s a step-by-step guide to help you do it right:

1. Determine the Desired Shape

Use an eyebrow pencil or a thin brush to sketch the desired shape of your slit. Consider your natural eyebrow shape, face structure, and personal style.

2. Mark the Starting and Ending Points

Using an eyebrow ruler or a small measuring tape, identify the starting and ending points of the slit. The starting point should be at the top of the arch, while the ending point is typically at the outer edge of the eyebrow.

3. Measure the Width and Depth

The width and depth of the slit are crucial for a flattering look. Here’s a detailed breakdown:

Measurement	Description
Width	Measure the distance between the two parallel lines that define the slit’s edges. Typically, a width of 1-2mm is suitable for a subtle slit, while a width of 2-3mm creates a more pronounced effect.
Depth	Measure the depth of the slit, which is the distance between the top and bottom lines. A depth of 1-2mm is recommended for a natural-looking slit, while a depth of 2-3mm creates a bolder, more visible effect.

Once you’ve measured and marked the slit, you can confidently proceed with cutting the hair to create the desired look.

Plucking in Sections

Plucking in sections is a more precise method that allows for greater control over the shape and thickness of your eyebrows. It’s best to follow these steps for each section:

Upper Arch

Starting from the inner corner of your eyebrow, pluck any stray hairs below the natural arch.

Middle Section

Focus on removing hairs from the center of your eyebrow, creating a gradual curve from the inner corner to the outer edge.

Tail

To define the tail of your eyebrow, pluck any hairs that extend beyond the imaginary line drawn from the outer corner of your nostril to the outer edge of your eyebrow. For a more angled tail, pluck hairs from the top of the tail rather than the bottom.

Eyebrow Shaping Table

Eyebrow Section	Plucking Technique
Upper Arch	Pluck hairs below the natural arch
Middle Section	Remove hairs from the center, creating a gradual curve
Tail	Pluck hairs from the top of the tail for an angled shape

Shaping the Arch

Creating a defined arch is key to achieving a sleek and polished brow. To do this, first determine your natural arch by following the highest point of your brow bone. This is usually located about two-thirds of the way from the inner corner of your eye to the outer corner.

Once you have identified the natural arch, use tweezers to pluck away any stray hairs below it. Start by tweezing at the bottom of the arch, gradually working your way up. As you pluck, keep your tweezers parallel to the brow line to avoid creating any sharp angles.

For a more pronounced arch, pluck a few additional hairs from the top of the arch. However, be careful not to overpluck, as this can create an unnatural and aging effect.

Here are some additional tips for shaping the arch:

Use a fine-tipped tweezer for greater precision.
Pluck in short, gentle strokes to avoid breaking the hairs.
If you have any gaps or uneven areas, fill them in with an eyebrow pencil or powder.

Once you have shaped the arch, you can fine-tune the overall shape of your brows by trimming and combing them. To trim, use a small, angled brush to gently brush the brows upwards. Then, use sharp scissors to trim any stray hairs that extend beyond the desired shape.

Finally, comb your brows into place using a spoolie brush. This will help to blend the hairs and create a natural, polished look.

Removing Stray Hairs

To remove stray hairs outside your desired brow shape, use a pair of clean tweezers.

8. Tweezing Technique

Follow these tips for effective tweezing:

Step	Description
1	Pull skin taut.
2	Grip the hair as close to the root as possible.
3	Pull in the direction of hair growth.
4	Avoid tweezing the same hair multiple times.
5	If the hair is resistant, wait a few days for it to weaken.
6	Use antiseptic wipes or alcohol to clean the tweezers before and after use.
7	Apply a cold compress or aloe vera to soothe irritation.

Note: If you have sensitive skin, tweezing may cause redness and swelling. Ice or anti-inflammatory creams can help reduce inflammation.

Finishing Touches

Once you’re satisfied with the shape of your eyebrows, it’s time to add the finishing touches. Here are some tips to help you achieve polished, natural-looking brows:

Tweeze Stray Hairs

Use tweezers to remove any stray hairs that fall outside the shape you’ve created. Be careful not to over-tweeze, as this can make your eyebrows appear too thin.

Brush and Tame

Use a spoolie brush or a clean mascara wand to brush your eyebrows in an upward direction. This will help to tame unruly hairs and give your brows a more defined look.

Fill in Sparse Areas

If you have any sparse areas in your eyebrows, you can use an eyebrow pencil or powder to fill them in. Choose a color that matches your natural brow color and apply it lightly with a fine brush.

Highlight Your Arch

To accentuate your arch, apply a small amount of highlighter or shimmer powder to the highest point of your brow. This will create an illusion of lift and make your eyes appear more open.

Set Your Brows

To keep your eyebrows in place all day, use a clear or tinted brow gel. Apply a small amount of gel with a spoolie brush, brushing your brows in an upward direction. You can also use a setting spray to help keep them in place.

Additional Tips for a Natural Look

Here are some additional tips to help you achieve a natural-looking eyebrow shape:

Avoid creating sharp angles or straight lines in your brows.
Don’t over-pluck your brows, as this can make them appear thin and unnatural.
Match the color of your eyebrow pencil or powder to your natural brow color.
Apply makeup lightly and blend it well.

Avoid	Aim for
Sharp angles	Soft, rounded curves
Over-plucking	Natural-looking fullness
Mismatched color	Complementary color
Heavy makeup	Light, blended application

Aftercare

After slitting your eyebrow, it is essential to follow proper aftercare instructions to promote healing and prevent infection. Here are some steps to follow:

Keep the area clean by gently washing it with mild soap and water or an antibacterial solution.
Apply a thin layer of antibiotic ointment or petroleum jelly to the slit to protect it from bacteria.
Cover the slit with a sterile bandage or gauze to keep it protected and clean.
Avoid touching or picking at the slit to prevent infection and scarring.
Change the bandage or gauze daily to keep the area clean and dry.

Tips

To ensure the best possible results from slitting your eyebrow, follow these tips:

Use a sharp, clean blade to avoid tearing the skin.
Hold the blade at a 45-degree angle to the skin.
Apply gentle pressure while slitting the eyebrow to avoid cutting too deeply.
Stretch the skin around the eyebrow before slitting to reduce the risk of tearing.
Stop slitting if you experience any pain or bleeding.
Moisturize the area after slitting to keep it hydrated and prevent drying.
Use sunscreen to protect the area from harmful UV rays.
Consider using an eyebrow gel or pomade to keep the hairs in place.
Be patient and allow the area to heal completely before judging the final results.
If you have any concerns, consult with a medical professional.

How to Slit Eyebrows

Slit eyebrows are a daring and edgy look that can add a touch of personality to your face. However, it’s important to note that this look is not for everyone. If you have thin or sparse eyebrows, slitting them may only accentuate their lack of fullness. Additionally, slit eyebrows require regular maintenance, so you’ll need to be prepared to commit to a regular grooming routine.

If you’re determined to give slit eyebrows a try, here are a few steps to follow:

Start with clean eyebrows. Wash your face and brush your eyebrows into place.
Use a sharp razor blade to carefully make a small incision in the center of your eyebrow. Be sure to hold the blade steady and make a clean cut.
Repeat the process on the other side of your eyebrow.
Use a cotton swab to apply a small amount of petroleum jelly to the incisions. This will help to soothe the skin and prevent infection.
Allow the incisions to heal for a few days before applying makeup or swimming. During this time, avoid touching the incisions or picking at them.

Once your incisions have healed, you can start to style your slit eyebrows. Use a brow pencil or powder to fill in the gaps and create the desired shape. You can also use a brow gel to keep your eyebrows in place.