Tired of your iPhone 13 being on silent mode all the time? Do you long to hear the sweet sound of incoming calls and notifications rather than just the subtle vibration? Well, it’s time to say goodbye to the quiet life and embrace the symphony of ringtones! In this comprehensive guide, we’ll delve into the world of iPhone ringer settings and provide a step-by-step walkthrough on how to turn on the ringer on your iPhone 13. Whether you’re a seasoned Apple user or a newbie to the iOS ecosystem, this guide will empower you to customize your ringer settings and never miss an important call or notification again.
Before we dive into the technicalities, let’s first understand why your iPhone ringer might be turned off. It could be because you accidentally activated the silent mode or enabled the “Do Not Disturb” feature. Perhaps you were in a meeting or a quiet environment and wanted to minimize distractions. Whatever the reason, turning on the ringer is a simple process that can be accomplished within a few taps.
To begin, locate the physical Ringer switch located on the left side of your iPhone 13. If the switch is in the down position, it means your device is on silent mode. Simply slide the switch upwards to enable the ringer. Additionally, you can check the ringer volume settings by opening the “Settings” app and navigating to “Sounds & Haptics.” Use the slider to adjust the volume level to your desired preference. Make sure that the “Change with Buttons” option is enabled to allow volume adjustments using the physical volume buttons on the side of your iPhone.
Adjusting Ringer Volume
Adjust the ringer volume on your iPhone 13 to your desired level. Here are the steps:
-
Press the volume up or down buttons on the side of your iPhone.
-
You will see a volume indicator appear on the screen. The left side of the indicator represents the ringer volume.
-
Use the buttons to adjust the ringer volume to your preference.
-
Additional Tips:
-
You can also use the Ringer and Alerts slider in the Settings app to adjust the ringer volume.
-
If you have a compatible Apple Watch, you can also adjust the ringer volume from your watch.
-
Ringer Volume Levels Indicator Color Mute Red Low Yellow Medium Green High Blue
-
Disabling Do Not Disturb
Do Not Disturb is a feature on the iPhone 13 that silences all incoming calls, texts, and notifications. If you have Do Not Disturb turned on, you will not hear any ringer when you receive a call.
To disable Do Not Disturb, follow these steps:
- Swipe down from the top-right corner of the screen to open Control Center.
- Tap the Do Not Disturb icon (
). - The Do Not Disturb icon will turn white, which means that Do Not Disturb is disabled.
You can also disable Do Not Disturb by going to Settings > Focus > Do Not Disturb and turning off the toggle switch.
When Do Not Disturb is Disabled
When Do Not Disturb is disabled, your iPhone 13 will ring when you receive a call. The ringer will play at the volume that you have set for it. You can adjust the ringer volume by going to Settings > Sounds & Haptics > Ringer and Alerts.
Exceptions to Do Not Disturb
There are a few exceptions to Do Not Disturb. By default, Do Not Disturb will not silence the following types of calls:
| Call Type | Will Silence |
|---|---|
| Emergency calls | No |
| Favorite contacts | No (if set up) |
| Repeat calls | No (if set up) |
You can also choose to allow certain apps to bypass Do Not Disturb. To do this, go to Settings > Focus > Do Not Disturb and tap the “Allowed Notifications” section. You can then select the apps that you want to allow to bypass Do Not Disturb.
Restarting the iPhone
Restarting your iPhone can help resolve various issues, including those related to the ringer. To restart your iPhone 13:
- Press and release the Volume Up button.
- Press and release the Volume Down button.
- Press and hold the Side button until the Apple logo appears.
Once your iPhone has restarted, check if the ringer is now working properly.
Checking the Ringer Settings
Ensure that the ringer volume is turned up and that the phone is not set to Do Not Disturb mode. To check the ringer settings:
- Go to “Settings” > “Sounds & Haptics”.
- Under “Ringer and Alerts”, use the slider to adjust the volume.
- Make sure that “Change with Buttons” is enabled.
Disabling Bluetooth
If your iPhone is connected to a Bluetooth device, it may be sending audio to that device instead of the ringer. To disable Bluetooth:
- Swipe down from the top-right corner of the screen to open the Control Center.
- Tap on the Bluetooth icon to disable it.
Cleaning the Receiver
Dirt or debris can block the receiver, preventing the ringer from sounding. To clean the receiver:
- Use a soft-bristled brush to gently remove any visible dirt.
- Blow compressed air into the receiver to dislodge any remaining particles.
Resetting All Settings
As a last resort, you can try resetting all settings on your iPhone. This will not erase any data, but it may resolve any software glitches that are causing the ringer issue.
- Go to “Settings” > “General” > “Transfer or Reset iPhone”.
- Tap on “Reset” and then “Reset All Settings”.
If none of these steps resolves the issue, you may need to contact Apple Support for further assistance.
Troubleshooting Common Issues
9. Ringer Not Working After Enabling It
If you’ve ensured that the ringer switch and volume settings are correct but the ringer still isn’t working, consider the following advanced troubleshooting steps:
| Possible Cause | Solution |
|---|---|
| Sound settings not properly configured | Go to Settings > Sounds & Haptics and adjust the “Ringer and Alerts” volume slider. |
| Software bug | Restart your iPhone by pressing and holding the side button and either volume button until the “slide to power off” slider appears. |
| Hardware issue | If the aforementioned steps don’t resolve the issue, there may be a hardware problem. Contact Apple Support for further assistance. |
| Blocked contacts | In the “Phone” app, go to “Contacts” and check if the contact you’re having trouble hearing from is blocked. |
| Do Not Disturb mode enabled | In the Control Center, check if Do Not Disturb mode is enabled. If so, tap the “crescent moon” icon to disable it. |
How to Turn On Ringer on iPhone 13
1. Open the “Settings” app on your iPhone 13.
2. Tap “Sounds & Haptics”.
3. Under the “Sounds and Vibration Patterns” section, adjust the Ringer and Alerts volume slider to the desired level.
4. To enable vibration along with the ringer, toggle on the “Vibrate on Ring” switch.
5. To customize the ringer sound, tap “Ringtone” and select your preferred tone from the list.
6. If you want to assign a different ringtone to a specific contact, go to the Contacts app, select the contact, tap “Edit,” and choose a ringtone under “Ringtone”.
7. To ensure your ringer is audible, check if “Do Not Disturb” mode is turned off by going to “Settings” > “Focus” > “Do Not Disturb”.
8. If you’re still facing issues with the ringer, restart your iPhone 13 by pressing and holding the Volume Down button and the Side button simultaneously until the Apple logo appears.
9. Reset all settings to their defaults by going to “Settings” > “General” > “Transfer or Reset iPhone” > “Reset” > “Reset All Settings”.
Additional Tips for Ringer Activation
10. Ensure that the iPhone’s speaker is not blocked or covered by a case or other objects.
10. Check if the headphone jack is clean and free of debris.
10. If using a Bluetooth device, verify that it is properly connected and paired with your iPhone 13.
10. Ensure that the iPhone’s software is up to date by going to “Settings” > “General” > “Software Update”.
10. Contact Apple Support if the issue persists, as it could indicate a hardware problem.
How to Turn on Ringer on iPhone 13
1. Slide the switch on the side of the iPhone to the right. This will turn on the ringer and vibrate.
2. If the switch is already to the right, try restarting the iPhone. To restart, press and hold the power button until the power off slider appears. Then, slide the slider to turn off the iPhone. Wait a few seconds, then press and hold the power button again to turn it back on.
3. If the ringer still isn’t working, try resetting the iPhone to its factory settings. To reset, go to Settings > General > Reset > Erase All Content and Settings. This will erase all data on the iPhone, so be sure to back up your data before resetting.
People also ask
How do I turn on the ringer on my iPhone 13 if the switch is broken?
If the switch on the side of your iPhone 13 is broken, you can still turn on the ringer by going to Settings > Sounds & Haptics. Then, tap the Ringer and Alerts slider to turn it on.
How do I turn off the ringer on my iPhone 13 when I’m in a meeting?
You can turn off the ringer on your iPhone 13 when you’re in a meeting by putting it into Do Not Disturb mode. To do this, swipe down from the top of the screen and tap the Do Not Disturb icon.
How do I change the ringer volume on my iPhone 13?
You can change the ringer volume on your iPhone 13 by going to Settings > Sounds & Haptics. Then, tap the Ringer and Alerts slider to adjust the volume.
